Table of Contents
Advertisement
SCREEN Menu
A
uto A
djustm
en
t
A
uto A
djustm
en
t
- RGB (PC) mode only; This function doesn't work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
- The
Auto config.
and
Manual config.
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button to run Auto configure.
• When
Auto config.
has finished,
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
you can make further adjustments with the
M
an
u
al Confi
gur
e (RGB-PC m
M
an
u
al Confi
gur
e (RGB-PC m
- If the image still isn't clear after auto adjustment and especially if characters are still
jittery, adjust the picture Phase manually.
- To correct the screen size, adjust
1. Press the MENU button and then use
G
2. Press the
button and then use
3. Press the
G
button and then use
4. Use the
F / G
button to make appropriate adjustments.
• The
adjustment range is 0 ~ 30.
Phase
• The
Clock
adjustment range is -127 ~ +128.
5. Press the ENTER button to save.
Settin
g Pi
ctur
e Form
at
Settin
g Pi
ctur
e Form
at
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for TV, Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and DVI-PC sources.
- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
•
4:3
Choose
when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and
4:3
right sides.
•
16:9
Choose
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
16:9
•
Theater wide 1
Choose
Horizon
when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to cre-
ate a spectacular view.
•
Theater wide 2
- Choose
when you want to view the picture without any alteration. However, the top and bottom portions of the picture
Zoom
will be cropped.
are not active in DVI mode.
button to select the
D / E
button to select
D / E
Auto config.
OK
will be shown on screen.
option.
Manual config.
od
e only)
od
e only)
.
Clock
button to select the
D / E
D / E
button to select
Manual config.
button to to select
Phase
D / E
SCREEN
menu.
SETUP
.
VIDEO
AUDIO
TIME
SPECIAL
Auto config.
,
SCREEN
PIP/DW
LOCK
SETUP
VIDEO
menu.
SCREEN
AUDIO
.
TIME
or
Clock
.
SPECIAL
SCREEN
PIP/DW
LOCK
ARC
in the
G
Auto config.
To set
Manual config
Aspect ratio
Cinema
NR
Reset
Prev.
Menu
Auto config.
G
Manual config
Phase
0
Aspect ratio
Clock
0
Cinema
NR
Reset
Menu
Prev.
SCREEN
menu.
P A G E 3 7
Advertisement
Table of Contents
