Adding To An Existing Sonos System - Sonos CONNECT:AMP Product Manual

Hide thumbs Also See for CONNECT:AMP:

Table of Contents

Sonos CONNECT:AMP

Adding to an Existing Sonos System

Once you've got your Sonos system set up, you can easily add more Sonos products any time (up to 32

rooms).

If your house has structured (built-in) wiring, you can make a wired connection to the additional Sonos

products. If you don't, our built-in wireless technology is ideal for you.

Attach desired speakers.

• Your speaker's power rating should be at least 75W for 8 Ohm speakers, and at least 150W for 4 Ohm

speakers. Do not connect speakers rated at less than 4 Ohms.

• Use your thumb or finger to firmly push the spring-loaded speaker connector post inward to reveal the

connection hole.

• Insert the stripped end of the speaker wire into the hole, and then release. The stripped portion should

be caught firmly in the connector post.

Note: Connect the red (+) and black (-) terminals from each speaker to the

corresponding terminals on the Sonos CONNECT:AMP. Mismatching of polarities

will result in weak central sound, and a distorted sense of sound direction.

When making connections, ensure that none of the strands of your speaker wire

come in contact with an adjoining terminal on the rear panel.

• Repeat to install the other speaker wires.

• If your speakers have banana connectors, you can insert the plugs directly into the banana jacks on the

back of the CONNECT:AMP instead.

Attach the power cord and plug into a wall outlet—make sure the Voltage Switch on the back of the

CONNECT:AMP is set to the proper position for your country before applying power.

After a few moments, the Status indicator will begin to flash green (if this Sonos product was previously

connected to another Sonos system, the Status indicator may be solid white instead.)

Choose one of the following options:

• Using the Sonos app on a mobile device: Select Add a Player or SUB from the Settings menu, and

follow the on-screen prompts to add this product to Sonos.

• Using the Sonos app on a Mac or PC: Select Add a Player or SUB from the Manage menu and follow

the prompts to add this product to Sonos.

Table of Contents