Wps - TP-Link AC750 User Manual

Chapter 4
4. 4. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless (2.4GHz or 5GHz)
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the WPS button of the new device within the next two minutes
Connect.
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
> WPS.
Enabled and click Add
Enabled and click Add
Configure the Router
Device.
Device.
and click
24