Panasonic KX-P7105 Operating Instructions Manual page 71

The printer driver cannot automatically detect that an option has been installed in the
printer. After installing an option in the printer, you must define it whether an option is
installed or not. It must be changed by using the printer properties window
under Windows
cannot be displayed in the printer properties window from an application.
tings Tab (Windows NT 4.0 / Windows 2000)
To define an installed option,
For Windows NT 4.0
1
For Windows 2000
1
yed.
2
CD-ROM into the CD-ROM drive.
on or Shared as check
-p7105 or Kx-p7110 file. Click
n the Share Name or
95 window is displayed.
dows 98, the printer name
Windows NT 4.0)
next steps. The following is Tray Assignment
in Windows NT 4.0.
ssign the paper size to the media tray or manual feed.
d mismatched documents check box is checked on in the Scheduling tab
tional Drivers... .
s NT 4.0) or Advanced tab (Windows 2000), it will be displayed that paper size
t in the spooler window on Windows when you print a document on the different
r with the Form To Tray Assignment.
Downloaded From ManualsPrinter.com Manuals
(see "Displaying the Printer Properties Window" on page
Click the option in the Install Options and then select Installed, Not installed or
installed memory in the Change Setting box.
Click the underlined selection (ex. Not Installed of the 2nd Feeder) of the option.
The selection box is displayed.
Click the selection box, then select Installed, Not Installed or installed memory.
Open .
38). This menu