Panasonic KX-P7105 Operating Instructions Manual page 287

lp Port
BOJ String
EOJ String
me Factory Default
I Protocol ENABLE
enc/sjis Port
ame KXPxxxxxx
BOJ String
Default
Sets the interval to login to the file server.
KXP-Printer
Enables or disables Bindery mode.
EOJ String
You may set the name of the file server.
Panasonic
KX-P7110
Printer Emulation
Sets the NDS tree. Nomally, KX-P7110
will automatically detect the tree name.
However, when there are several trees
y, but it may take extra time
within the network, you must set the
Tab Size
name.
name is correct.
Sets the context used by NDS in print
ort name is assigned to the
me Factory Default
server name.
7110 on the network, make
mmunity ******
Enables or disables Remote Printer
mode.
110 and the file server.
Page Width
You may set the print server name to
e.
c Trap DISABLE
which the KX-P7110 is connected.
s
munity public
s A time for KX-P7110 to recognize the end
ly.
of a job in remote printr mode.
Page Length
ss 0.0.0.0
NULL
ly.
Default
ne name is selected from
NULL
Enables or disables AppleTalk protocol.
Downloaded From ManualsPrinter.com Manuals
xxxxxx Sets AppleTalk printer name. The name
name Factory Default
NULL
NULL
Enables or disables NetBEUI protocol.
Sets Computer name. This name is
NULL
Description
shown as the computer in Windows
Explorer.
Sets the workgroup to which KX-P7110
\f
belongs.
This comment is shown as the computer
in Windows Explorer.
ASCII
8 char
Sets SNMP authentic community name.
This community name is authenticated
when receiving SNMP Set Request.
0 char
Enables or disables authentic trap.
Enters TRAP community name. This
name will be used when the printer
0 line
executes a trap.
Enters the TRAP address. The TRAP
address is disabled if the IP address is set
0.0.0.0.
Enters SysContact for MB-II object.
Normally enter the administrator™s mail
Description
address.
Enters SysName for MB-II object.
Normally enter the host name or domain
Sets the string that will be sent before
sending a print job to the direct output
port(lp).
Sets the string that will be sent at the end
Description
of a print job to the direct output port(lp).
Sets the string sent before sending the
printing job to the output port via Kanji
filter(sjis, euc).
Sets the string that will be sent at the end
of the printing job to the output port via
Kanji filter (sjis, euc).
Sets printer emulation (PDL). Changes to
appropriate code when printing via Kanji
filter (sjis, euc).
Sets the number of spaces that
correspond to 1 tab. All tab codes will be
converted to the spaces according to the
Description
number set here. This feature will not be
available when this is set to "0" or when
the job is directly sent to the printer.
Sets the number of characters for the auto
line feed feature of the Kanji filter. The
auto line feed feature is not available
when this is set to "0".
Sets the number of lines for auto page
feed feature of the Kanji filter between the
number 0-255. The auto page feed
feature is not available when this is set to
"0".
Description