625 Lines Field; Aspect Ratio Menu; Input Field; Output Field - Motorola DSR-6050 Operator's Manual

3

625 Lines Field

Aspect Ratio Menu

Input Field

Output Field

24
Press the4button until the cursor is at the 625 Lines label, and press the ENTER
button to move into the field. This field allows selection of the output format for
625-line video as either PAL D G B, PAL I, or PAL N. The default setting is PAL D
G B. Press the56buttons to display the options. Press the ENTER button to
confirm the selection.
Press the56buttons until the Aspect Ratio menu appears. It displays the current
input aspect ratio and has one field that allows the output aspect ratio to be changed
when the uplinked video has an aspect ratio of 16x9. If the DSR-6050 receives
input of 4x3, the output is always 4x3.
The Input field displays the aspect ratio of video that the DSR-6050 is currently
receiving. It is non-editable.
Press the4button until the cursor is at the Output label. Press the ENTER button to
enter the field. There are multiple options: 4x3 (PanScan), 4x3 (Zoom), and 4x3
(Letterbox). Use the56buttons to specify the desired option. The output default
setting is 4x3 (PanScan). If 4x3 (PanScan) information is not available when the
4x3 4x3 (PanScan) option is chosen, the DSR-6050 outputs the center portion of
the 16x9 image.
If you select a new aspect ratio, the following warning screen appears:
Press any arrow button (3456) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed.