The Dvr Setup Menu; Initial Configuration; Auto-Channel Scan - Polaroid DVR-0900 Operation Manual

The DVR Setup Menu

Installation: The DVD-Recorder is equipped with a
TV tuner making it possible for you to watch TV or
record your favorite shows to DVD for later playback.
1. Connect your cable TV or antenna to the TUNER
input jack found on the back of the DVD player.
(See page 17)
2. Make the appropriate Audio/Video connections
(see pages 13-18).
3. Plug in your DVD-Recorder. Now you're ready to
configure the DVD-Recorder.

Initial Configuration

1. Turn on the TV.
2. Press the POWER button on the remote to turn
on the DVD-Recorder and press the SETUP
button to call up
(direction buttons) to highlight the
desired option, and then press the ENTER to
select.
Figure 1. The menu
Note: During DVD playback, if you want to watch
TV, please highlight the Watch TV, and then press
the ENTER.
During MP3 or CD playback, if you want to watch
TV, please open the disc tray and take out the
disc first.
the Menu. Use the
Channel Source
You can choose between CATV (Cable TV) and AIR
(Regular Antenna).
Figure 2. The Channel Source Options
Channel Setup
You must setup your channels before you record TV
programs.

Auto-Channel Scan

1. From the main menu use the arrow keys to
highlight "Channel Setup".
2. Press the ENTER button to select "Auto CH
Scan".
Figure3. The Channel Setup Options
3. When the Auto CH Scan function is selected,
the auto-channel scanning process begins.
4. After the auto-channel scanning process
finishes, the total number of channels found
will be shown on the screen.
5. Select the Channel List function to display
the complete list of all the channels that were
found during the auto-channel scanning
process.
6. Press the SETUP button on the remote to
exit and save the selection.
- 19 -