8-5. Microphone Part
Main MIC
Microphone does not work
MiC hall will be checked
blocked up by MIC rubber
Check the status of
Check the MIC sample.
(it be possible the problem)
Yes
or others
OK
R401 ≒ 2.2V
at MIC Active?
YES
soldering
L400, L401
(ex. Crack)
OK
(MIC 400)
OK
END
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Not OK
MIC rubber set correctly
No
Replace UCP200 using a Heatgun
(Because if not soldering well)
Not OK
(not work if those is not connected)
Not OK
Replace an another MIC (MIC400)
(because of being possible the problem)
8-16
Level 3 Repair
or Clean the MIC hall
Resolder L400, L401