2.26 FINDER UNIT, OPTICAL UNIT
(1) Disengage the two dowels, and remove the portion A.
(2) Remove three screws ( l × 3).
(3) Disengage the two dowels, and separate the FINDER UNIT from the OPTICAL UNIT.
<Note on Reassembling>
Apply voltage (DC 2.0V) across the motor terminal to drive the motor until the motor stops and the barrel goes
back to the retracted position, and then install the FINDER UNIT to the OPTICAL UNIT.
Note on Reassembling
(1) DC 2.0V
(1)
l
(2) -
(1)
Dowels
30
Portion A
CD4-3018-000
(3)
Dowel
(3) OPTICAL UNIT
l
3.5mm
SILVER
M1.4
(SELF TAP)
(3)
FINDER UNIT
(3) Dowel