Transferring Photos To Your Computer - Polaroid PhotoMAX PDC 1320 User Manual

Transferring Photos to Your Computer

Caution: Do not connect the camera to your computer until after you install the
ArcSoft PhotoMAX Image Maker Software and restart your computer.
1
Turn the camera off and connect the camera to the AC
adapter (a).
2
Turn the camera on.
Note: It is important that you keep your camera on
during this entire process.
3
Turn the mode dial to PC
status LCD and an arrowhead points to the PC icon.
4
Connect the USB cable to the USB port on the back of
your computer. Check your computer's user manual
for the locations of the computer's USB ports.
5
Connect the other end of the USB cable to the USB port on the camera (b).
Caution: If the USB connection is not tight, the plug may pull out. Check that it is
fully inserted every time you transfer photos.
The computer may tell you that it has located the camera and is updating
the computer's database.
58 Questions? www.PolaroidDigital.com
. PC appears in the
b
a