(b) Reassembly
Disassembly procedures should be followed in the reverse order. Note that the protrusion of the Magazine
[90] is engaged in the Nose [27].
Nylon Nut M5 [36]
Nylon Nut M5 [36]
Protrusion
Engage.
Engage the protrusion of the
Magazine [90] in the hole of
the Cover [111].
Body [23]
Sleeve [85]
Pushing Lever Cover (A) [86]
Protector (B) [87]
Pin [89]
Ratchet Spring [96]
Hex. Socket Hd. Bolt
M5 x 20 [101]
Fig. 24 Disassembly and reassembly of magazine section
--- 30 ---
Hook [64]
Machine Screw M5 x 35
(Black) [65]
Pin [89]
Magazine [90]
Feeder Shaft Ring [91]
Magazine
Cover [92]
Holder Cap (A) [95]
Nail Holder [97]
Roll Pin D2.5 x 12 [98]
Holder Shaft [99]
Spring [100]