3.2.6 Removing the illumination board
(See Figs.5 and 6)
(1) Open the DVD door of the front panel assembly and re-
move the three screws F attaching the door holder to the
DVD door. (See Fig.5)
(2) Remove the DVD door from the door holder. (See Fig.5)
(3) From the inside of the DVD door, disconnect the card wire
from the connector
CN551
Fig.6)
(4) Take out the illumination board from the DVD door.
on the illumination board. (See
Door holder
Front panel assembly
Fig.5
Door holder
CN551
Card wire
Illumination board
DVD door
Fig.6
F
DVD door
(No.MB294)1-15