Handset Security; Phone Lock; Password Lock - SoftBank 820SC User Manual

Tip
• USIM password
This is a password dedicated to USIM Card
authentication. If USIM password matches, another
USIM Card may be used in 820SC.
Change USIM password each time the USIM check
setting is set to Enable.
• When you forget your USIM password
Insert a USIM Card (with USIM lock set to Enable) in
820SC and execute All reset ( P.13-11).

Handset Security

Phone Lock

Default Disable
Setting
Set Phone lock to Enable; then Phone Password
entry is required each time the power is turned on.
APress c and select Settings → Security
→ Phone lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)

Password Lock

Default Disable
Setting
Set Password lock to Enable; Press any key in
Standby; Phone Password entry window appears.
Enter Phone Password to cancel Password lock;
820SC operations are enabled.
APress c and select Settings → Security
→ Password lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)
13
13-5