Brake Fluid - Polaris Trail Touring Owner's Manual

MAINTENANCE
Brakes

Brake Fluid

WARNING! After opening a bottle of brake fluid, always discard any unused
portion. Never store or use a partial bottle. Brake fluid is hygroscopic, meaning it
rapidly absorbs moisture from the air. The moisture causes the boiling
temperature of the brake fluid to drop, which can lead to early brake fade and
the possibility of accident or serious injury.
On some models, the brake fluid level can be seen through a plastic
sight glass in the brake reservoir. If the fluid is sufficient, the sight glass
will be black. If the sight glass is any color other than black, add brake
fluid.
On all other models, frequently check the reservoir to be sure it contains
the correct amount of fluid. To add fluid, remove the master cylinder
reservoir cover. Add the recommended brake fluid to bring the level up
to the top of the fluid level mark on the inside of the reservoir.
Keep the master cylinder cover free of dirt and debris. The vent slits
allow for diaphragm movement, and if they become plugged, movement
of brake fluid below the diaphragm may be restricted, altering brake
function.
We recommend the use of Polaris DOT 4 high temperature brake fluid.
See page 111 for the part numbers of Polaris products.
NOTICE: Brake fluid will damage decals, paint and some plastics. Always wipe
up spills immediately.
Replace brake fluid at least every two years.
85