Polaris Trail Touring Owner's Manual page 69

OPERATION
Electronic Reverse (PERCt)
Engaging Reverse
1. Stop the snowmobile and leave the engine idling.
2. Make sure the area behind your vehicle is clear.
3. Push the yellow reverse but-
ton ( ) on the left-hand con-
trol for one second, then
release. The engine will auto-
matically reduce RPM and
start a reverse rotation. A
flashing reverse light on the
instrument panel will indicate
that the transmission is in
reverse.
4. Apply the throttle slowly to
make sure the transmission is
in reverse.
Tip: The maximum engine RPM will be 6000 when in reverse.
Tip: If the engine stops running, the snowmobile will be in forward gear when it's
restarted.
66