Engine Stop Switch; Headlight Switch - Polaris Sportsman 9921169 Owner's Manual

Switches

Engine Stop Switch

Move the stop switch either
left or right to the OFF position
to stop the engine quickly. The
engine will not start or run
when the switch is off.
NOTE:
Both the main switch and the engine stop switch will shut off all electri-
cal power to the vehicle, including lights.
Main Key Switch
Use the main key switch to start the engine. See page 57 for starting pro-
cedures.
Work Light Switch
Use the work light switch (if equipped) to turn the work light on or off.
The work light is located at the rear of the vehicle. Turn the light on
while loading and unloading cargo in low light situations. Turn the work
light off when driving.

Headlight Switch

Use the headlight switch to turn the lights on and off and to change the
lights from high beam to low beam.
NOTE:
The lights won't work unless the key is in the ON position and the
engine stop switch is in the RUN position.
Operating the ATV on streets or roads, especially in darkness, could result in
an accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It's designed for and
must be used for off-road use only. Use caution and drive at reduced speeds
in conditions of reduced visibility such as fog, rain and darkness.
FEATURES AND CONTROLS
WARNING
OFF RUN OFF
35