Frequently Asked Question - Philips SWW1810 User Manual

9 Frequently asked question

The power LED on the
receiver is not lit up in red in
standby mode.
There is no video displayed on
my TV screen.
If the picture quality is poor,
what do I do?
I cannot hear any sound or the
sound is poor, what do I do?
18 EN
‡ Make sure that there is power supply for the transmitter and
receiver.
‡ Make sure that the appropriate cables are selected and inserted
to the transmitter, receiver, and HDTV.
‡ Make sure that you select HDMI as the input source on your
HDTV.
‡ Check the power LED and SOURCE LED on the receiver:
‡ Flashing blue power LED: Make sure that the transmission
range between receiver and transmitter is not over 65 feet
transmission distance. Move the transmitter closer to the
receiver.
‡ 6ROLG EOXH SRZHU /('  VORZ DQG ÁDVKLQJ VRXUFH /(' 1)
Make sure that the frame rate and video resolution of your
VRXUFH GHYLFH HTXLSPHQW DUH VXSSRUWHG DQG FRQIRUPHG WR
WKH WHFKQLFDO VSHFLÀFDWLRQ 2) Connect the source device to
your TV with an HDMI cable to check the compatibility of
the video format. 3) Make sure that the video solution your
VRXUFH GHYLFH LV VXSSRUWHG 6HH WKH FKDSWHU ¶7HFKQLFDO GDWD· 
‡ 6ROLG EOXH SRZHU /('  TXLFN DQG ÁDVKLQJ VRXUFH /(' 
Make sure that the proper cables are connected among the
transmitter, receiver and HDTV. 2) Make sure that the source
devices connected to the transmitter are powered on.
‡ Make sure that the video resolution of your source device
matches the resolution of your HDTV.
‡ Make sure that the transmission range between receiver and
transmitter is not over 65 feet transmission distance.
Tip
‡
For information, see the chapter on 'Technical data'.
‡ Make sure that the TV volume is adjusted correctly.
‡ Make sure that the TV volume is not set to minimum or the
sound is not muted.
‡ Make sure that the audio format is supported.
‡ Make sure the HDMI cable of the transmitter is connected
correctly.
Tip
‡
)RU LQIRUPDWLRQ VHH WKH FKDSWHU RQ ¶7HFKQLFDO GDWD VHFWLRQ ¶3URGXFW VSHFLÀFDWLRQ·