Installing The Main Power Supply Module; Installing The Second Power Supply Module - Supermicro SSE-G3648B Installation Manual

E1031Series switch Installation Guide

Installing the Main Power Supply Module

SSE-G3648B/BR switches support 2 power supplies (One power supply is provided in the
standard configuration).
Figure 4-2a: SSE-G3648B/BR Switch Power Supply Installation –
Please follow these instructions for installing and removing the main power supply module:
1. Insert the power supply into the opening as shown.
2. The golden finger of the power supply should be inserted end-downwards. Once
secure, you can hear the lock sound "click".
3. Force the lock on the side of AC cable socket in the direction of the fan when removing
the power supply module. Then you can easily withdraw the power supply.

Installing the Second Power Supply Module

Ensure that you have the correct power supply when installing a second redundant power
supply into the switch. The regular airflow SSE-G3648B requires a PWS-FRU-G3648-1F. For
the SSE-G3648BR you will need the PWS-FRU-G3648-1R.
Note: The power supply has its own cooling fan. It is important to use the correct power supply
module to ensure proper cooling of the switch.
Chapter 3 Device Installation
Single Power Supply
34