Compression Damping - Polaris Outlaw 9922079 Owner's Manual

Rear Suspension

Compression Damping

The compression damping clickers are located on the
bottom of the shocks (on the lower clevis). Use a
screwdriver to make adjustments.
To set the shock at the firmest setting, turn the screw
clockwise until it stops (fully closed position). From
this position, turn the screw counter-clockwise to
decrease compression damping.
Setting
Softest
Factory
Firmest
Compression Damping
24 clicks from closed
8 clicks from closed
2 clicks from closed
Maintenance
Compression
Adjustment
159