Polaris Outlaw 9922079 Owner's Manual page 158

Front Suspension
Spring Preload
1. Raise and safely support the front of the vehicle
off the ground to allow the suspension to fully
extend.
2. Loosen the jam nut.
3. Turn the adjusting ring clockwise to increase
preload. Turn the ring counter-clockwise to
decrease preload.
4. Tighten the jam nut firmly against the adjusting
ring.
5. Measure the preload of the left and right
shocks. Make sure both shock measurements
are equal.
Maintenance
Adjusting
Jam Nut
(upper)
Increase Decrease
Preload Preload
Ring
(lower)
155