Table of Contents
Advertisement
Hookup 5:
VCR setup
1
Set the RF UNIT switch to
CH 3 or CH4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 69.
If you made A/V connections (from page 8), you can skip this step.
2
Turn on your DSS receiver.
3
Change the on-screen display language if you
want. For details, see page 29.
1 Press MENU and select LANGUAGE.
2 Select your language, then press EXECUTE.
4
Set the clock. For details, see page 30.
1 Press MENU and select CLOCK SET.
2 Select AUTO, then press EXECUTE.
3 Set FULL AUTO to YES, then press EXECUTE.
5
Set up the DSS receiver. For details, see page
36.
1 Press MENU and select CABLE BOX
CONTROL.
2 Set CABLE MOUSE to ON.
3 Enter your DSS receiver code number (BOX
CODE NO) and press CURSOR..
4 Set your DSS receiver output channel (BOX
OUTPUT CH) to LINE and press EXECUTE.
RF UNIT
CH3
CH4
LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
CLOCK SET
AUTO MANUAL
AUTO CLOCK SET
FULL AUTO
YES NO
CABLE BOX CONTROL
CABLE MOUSE
ON
CABLE BOX CONTROL
CABLE MOUSE
ON
BOX CODE NO.
–
BOX OUTPUT CH
CH3
CABLE BOX CONTROL
CABLE MOUSE
ON
BOX CODE NO.
6
BOX OUTPUT CH
LINE
continued
Getting Started
SLV-765HF
3-800-552-31 (1)
OFF
OFF
––
OFF
50
23
Advertisement
Table of Contents
