Biostar TP35D3-A7 deluxe Setup Manual page 84

TP35D3-A7 Deluxe
ACPI Function
This item displays the status of the Advanced Configuration and Power
Management (ACPI).
The Choices: Enabled (default), Disabled.
ACPI Suspend Type
The item allows you to select the suspend type under the ACPI operating
system.
The Choices: S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR
Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card
when system wakes up from S3 state. The system resume time is shortened if
you disable the function, but system will need AGP driver to initialize the card.
So, if the AGP driver of the VGA card does not support the initialization
feature, the display may work abnormally or not function after S3.
The Choices: Auto (default), Yes, No.
Wake-Up by PCI card
When you select "Enable", a PME signal from PCI card returns the system to
Full On state.
The Choices: Enabled (default), Disabled.
PCI Express PME
The Choices: Enabled (default), Disabled.
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Enabled, Disabled (default).
USB KB Wake-Up From S3
This item allows you to enable or disabled the USB keyboard wake up from S3
function.
The Choices: Disabled (default), Enabled.
Resume by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time of system resume.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
24