Biostar TP35D3-A7 deluxe Setup Manual page 35

O ve rclock Panel contains these fe atures:
a. "Auto-Overclock":
User can click this button and T-Utility will set the best and stable
performance and frequency automatically. A warning dialog as
below will show up to notify you that the system may become
unstable, click on "OK" to continue.
Then T-Utility will execute a series of testing until system fail.
Then system will do fail-safe reboot by using Watchdog function.
After reboot, launch the T-Utility again and the utility will load the
previously verified best and stable frequency.
b. "Verify":
If you use the "Manual Adjust" bar to adjust the CPU frequency,
then you can click this button and T-Utility will proceed a testing for
current frequency. If the testing is ok, then the current frequency
will be saved into system registry. If the testing fails, system will do
a fail-safe rebooting. After reboot, the T-Utility will restore to the
hardware default setting.
Warning:
Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let T-Utility automatically gets the
best result f or y ou.
c. "V3 Engine"/"V6 Engine"/"V9 Engine":
Provide user the ability to do real-time overclock adjustment.
d. "Recovery":
Click this button and the T-Utility will restore all values to the
hardware default setting.
TP35D3-A7 Deluxe
33