Yamaha MX800 Owner's Manual page 21

1
0˚C 25˚C
YAMALUBE SAE 10W-30
Performance All Purpose
SAE 5W
32˚F 80˚F
6. Install the new oil filter cartridge with an oil filter
wrench, and then tighten it to the specified torque
with a torque wrench.
1. Torque wrench
Oil filter cartridge tightening torque:
14 N·m (1.4 kgf·m, 10 lb·ft)
7. Check the oil drain bolt, oil filler cap and O-ring.
Replace them if damaged.
8. Install a new gasket and the oil drain bolt and then
tighten the bolt.
Oil drain bolt tightening torque:
27 N·m (2.7 kgf·m, 20 lb·ft)
9. Fill the specified amount of the recommended
engine oil from the oil filler hole.
1. Oil filler hole
NOTICE
Be sure no foreign material enters the crankcase.
Recommended engine oil:
A YAMALUBE SAE 10W-30 Performance All
Purpose,
SAE 10W-30 or 10W-40
B SAE 5W-30
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
2.0 L (2.11 US qt, 1.76 Imp qt)
10.
Start the engine and let it idle for several minutes
while checking for oil leaks.
NOTICE
If oil is leaking, immediately turn the engine off and
consult a Yamaha dealer.
Periodic maintenance
14