Polaris 700 Fusion Owner's Manual page 124

IQ Suspension Troubleshooting
Problem
Rear suspension
bottoms too easily
Rides too stiff in
rear
Machine darts from
side to side
Front end pushes
Steering is heavy
Solution (perform only one change at a time)
S Adjust torsion spring preload to achieve proper static sag
(see page 44).
S Change torsion spring to stiffer optional spring (see your
dealer).
S Revalve rear track shock (see your dealer).
S Check for binding suspension shafts and grease all pivot
points.
S Adjust torsion spring preload to achieve proper static sag
(see page 44).
S Change torsion spring to softer optional spring (see your
dealer).
S Check for proper track tension (see page 107).
S Check ski alignment (see page 110).
S Make sure spindles and all steering components turn freely.
S Ensure skags are straight on skis.
S Check rail slide/replace if worn (see page 112).
S Install dual skags.
S Set static sag (see page 44).
S Check for worn skags.
S Set static sag (see page 44).
S Install single skag (see your dealer).
S Rotate RRSS to high position (see page 48).
S Make sure spindles and all steering components turn freely.
S Check ski alignment (see page 110).
S Check skags and skis for damage.
S Set static sag (see page 44).
TROUBLESHOOTING
121