Rear Spring Preload - Polaris 700 Classic Owner's Manual

FAST M-10 Rear Suspension Adjustments
Static Sag and Ride Height Settings

Rear Spring Preload

If FRA position alone does not allow the setup of the proper amount of
sag, the center retainer of the rear track shock can be replaced with
optional retainers to adjust the preload and change the sag. See your
Polaris dealer for assistance.
Retainer Insert
Part Number
5436109
NOTE: Whenever ordering any of the retainers listed in the chart,
always order the retainer insert as well. The insert is not
removeable once installed, so a new insert is needed when
installing a new retainer.
OPTIONAL RETAINERS
Retainer Part
Number
5135077
(standard on
M10-128)
5134923
5135080
(standard on
M10-136)
THE PERFECT FIT
Preload
Least
Middle
Most
Sag
Most
Middle
Least
45