Features; Gauge Cleaning - Polaris 600 HO RMK 155 Owner's Manual

FEATURES

Instrumentation

Gauge Cleaning

1. Wipe the gauge face as needed using a clean cloth and a mild soap
and water solution. Wipe dry with clean, soft cloth.
2. Clean the back side of the gauge using a clean cloth and a mild soap
and water solution. Do not remove the electrical connectors or pro-
tective rubber boot. Do not spray the back side of the gauge or the
wire harness with a pressure washer or other water source.
To prevent damage to the lens, do not use alcohol for cleaning. Do not allow
chemicals or sprays to contact the lens. Immediately clean off any gasoline
that splashes on the gauge during refueling.
38
CAUTION