Removal From Storage - Polaris 500 Owner's Manual For Maintenance And Safety

Removal from Storage

1. Check the battery electrolyte level and charge the battery if neces-
sary. Install it in the vehicle. Make sure the battery vent hose is
routed properly and that it's not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section
on page 33.
NOTE:
Tightness of the bolts, nuts and other fasteners should be checked by
an authorized Polaris dealer.
5. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 52.
Engine exhaust contains poisonous carbon monoxide and can cause loss of
consciousness or death. Never run an engine in an enclosed area.
Transporting the RANGER
Follow these procedures when transporting the vehicle.
1. Stop the engine.
2. Remove the key to prevent loss during transporting.
3. Place the transmission in gear.
4. Engage the park brake.
5. Secure the fuel cap, oil cap and seat.
6. Always tie the frame of the RANGER to the transporting unit
securely with suitable straps or rope. Do not attach tie straps to the
front A-arm bolt pockets.
WARNING
MAINTENANCE
101