Line In Level - Kawai Novus NV10 Owner's Manual

Sound Settings
5

Line In Level

The Line In Level setting allows the volume level of the instrument's Line In input jacks to be adjusted digitally. This
setting may be useful when using the USB Recorder function and attempting to balance an external audio source
with the instrument's sound.
* The Line In Level can also be adjusted by using the LEVEL knob, located on the jack panel. Please refer to page 155 for more information.
 Adjusting the Line In Level setting
Long press and drag the slider to adjust the Line In Level setting.
* The Line In Level can be adjusted within the range of –10 dB~+10 dB.
* Any changes made to the Line In Level setting will remain until the
power is turned off.
Line In Level slider
 Line In Level setting vs Line In LEVEL knob
The NV10 hybrid digital piano provides two methods of adjusting the level of the Line In audio: the Line In LEVEL knob (located
beside the Line In jacks on the jack panel), and the Line In Level setting. The LEVEL knob is used to adjust the analogue volume
of the sound entering the instrument, while the Line In Level setting adjusts the digital volume of the sound once it is 'inside' the
instrument.
To ensure the Line In audio is of a high quality, it is recommended to set the volume of the external audio device (for example a tablet)
to a high level, then adjust the instrument's Line In LEVEL knob to a comfortable level, without distortion. If it is necessary to further
increase or decrease the volume of the external audio, the Line In Level setting can then be used as desired.
128