Ski Skags; Skag Replacement - Polaris 120 Dragon Owner's Manual

Polaris 2010 snowmobile owner's manual
Hide thumbs Also See for 120 Dragon:
Table of Contents

Advertisement

Maintenance

Ski Skags

The skag is a replaceable bar
attached to the underside of
the ski. The purpose of the
skag is to assist in turning the
snowmobile and to prevent
the wearing away of the ski
caused by contact with roads
and other bare terrain.
Check skags weekly to maintain positive steering characteristics.
Replace skags when they are worn to half their original diameter.
NOTE:
See the dealer track studding and skag chart for recommended skags.
Worn skis and/or skags will adversely affect handling and can cause loss of
vehicle control, which can lead to serious injury or death. Replace worn skis
and/or skags when inspection reveals wear.

Skag Replacement

1. Raise and support the front of the machine so the skis are approxi-
mately 6" (15 cm) off the ground.
2. Remove the attaching nuts and pry the skag downward.
3. Remove the forward portion of the skag.
4. Reverse this procedure for new skag installation.
WARNING
ADULT SECTION
Skag
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

120 2010

Table of Contents