AT&T CLP99183 User Manual page 44

Telephone operation
Redial
The telephone base and each handset store the last 10 dialed numbers (up
to 30 digits each) in the redial list. The redial entries of each handset and the
telephone base are independent.
Review the redial list
To review the redial list of a handset:
1. Press REDIAL/
q , p
2. Press
CID
handset beeps twice at the end of the list.
Press OFF/
CANCEL
To review the redial list of the telephone base:
1. Press REDIAL/
2. Press q
CALLER ID
list. The telephone base beeps twice at the end of the list.
Press CANCEL to exit.
Dial a redial entry
To dial a redial entry on a handset:
1. Press HOME/FLASH, or
REDIAL/
PAUSE
2. Press q , p
CID
number displays. The handset beeps twice at the end of the list.
3. Press DIAL to dial the number displayed.
-OR-
1. Press CELL 1 or
to enter the redial list.
2. Press q , p
CID
number displays. The handset beeps twice at the end of the list.
INSERT
3. Press
4. Press DIAL to dial the number displayed.
in idle mode
PAUSE
or
REDIAL/
DIR
to exit.
in idle mode.
PAUSE
, p
DIRECTORY
/SPEAKER to use the home line, then press
to enter the redial list.
REDIAL/
or
DIR PAUSE
CELL 2 to use the cell line, then press REDIAL/
REDIAL/
or
DIR PAUSE
to insert the desired number.
.
repeatedly to browse the list. The
PAUSE
or REDIAL/
PAUSE
repeatedly to browse until the desire
repeatedly to browse until the desire
44
repeatedly to browse the
PAUSE