Toshiba Portege 2000 Maintenance Manual page 187

4.11 Touch pad/ MODEM Jack/LED SW membrane
4.11.2 MODEM jack
Removing the MODEM jack
The following describes the procedure for removing the MODEM jack. (See Figure 4-25)
1. Remove the following screw fixing the MODEM jack holder and MODEM jack.
• M2×4Z
Installing the MODEM jack
The following describes the procedure for installing the MODEM jack. (See Figure 4-25)
1. Install the MODEM jack holder and the MODEM jack and secure them with the
following screw.
• M2×4Z
Portage 2000 Maintenance Manual (960-333)
BIND screw x1
Figure 4-25 Removing the MODEM jack
BIND screw x1
4 Replacement Procedures
M2×4Z BIND
MODEM jack holder
4-35