Assembly Process Of Inverter Unit - Fujitsu AU*24LUAR Service Instruction

1-3-4 ASSEMBLY PROCESS of INVERTER UNIT (For AO*45/ 54LJBYL)
1. FILTER PCB
As shown in Fig.1, assemble FILTER PCB to INVERTER BOX A.
As shown in Fig.2, pull out the wires of FILTER PCB.
INVERTER BOX A
2. MAIN PCB
As shown in Fig.3, temporarily fix MAIN PCB to INVERTER BOX A.
After it is temporary fix of MAIN PCB, As shown in the Fig 4 - 6,
pull out the wires of MAIN PCB.
W14(Yellow)
W15(Blue)
Fig.4
FILTER PCB
Fig.1
MAIN PCB
Screw
10-31
Hook (2 places)
Screw (2 places)
Fig.5
Hook (3 places)
Fig.6
Fig.3
Fig.2