Table of Contents
Advertisement
Safety
1
Safety
1
Directives
.01
This machine is constructed in accordance with the European regulations contained in the
conformity and manufacturer's declarations.
In addition to this Instruction Manual, also observe all generally accepted, statutory and other
regulations and legal requirements and all valid environmental protection regulations!
The regionally valid regulations of the social insurance society for occupational accidents or
other supervisory organizations are to be strictly adhered to!
1
General notes on safety
.02
1 - 1
This machine may only be operated by adequately trained operators and only after having
completely read and understood the Instruction Manual!
All Notes on Safety and Instruction Manuals of the motor manufacturer are to be read
before operating the machine!
The danger and safety instructions on the machine itself are to be followed!
This machine may only be used for the purpose for which it is intended and may not be
operated without its safety devices. All safety regulations relevant to its operation are to be
adhered to.
When exchanging sewing tools (e.g. needle, roller presser, needle plate and bobbin), when
threading the machine, when leaving the machine unattended and during maintenance
work, the machine is to be separated from the power supply by switching off the On/Off
switch or by removing the plug from the mains!
Everyday maintenance work is only to be carried out by appropriately trained personnel!
Repairs and special maintenance work may only be carried out by qualified service staff or
appropriately trained personnel!
Work on electrical equipment may only be carried out by appropriately trained personnel!
Work is not permitted on parts and equipment which are connected to the power supply!
The only exceptions to this rule are found in the regulations EN 50110.
Modifications and alterations to the machine may only be carried out under observance of
all the relevant safety regulations!
Advertisement
Table of Contents
