Protecting The Projector With The Security Lock - Taxan KG-PS100S User Manual

General Operation

Protecting the Projector with the Security Lock

A password can be registered and the security lock set in order to protect the projector from unauthorized use.
Registering the password
The password is registered using the menus. For instructions on operating the menus, see "Menu Operation Method" on E-34.
(1) Select "Security Lock" in the "Option" menu and set it to "Enable".
The menu closes and the password registration display appears.
(2) Register using the (four) input buttons.
Be sure to input a 4-digit number.
Example: Registering the password "3221"
Supposing that the input buttons are substituted by number buttons, the
substitution will be:
FREEZE button ........................ "1"
MUTE button ............................ "2"
ECO button .............................. "3"
QUICK COLOR ADJ button ..... "4"
(1) When input button "ECO" is pressed, an "
first digit.
Continuing, pressing the "MUTE" "MUTE" "FREEZE" input buttons will
enter asterisks in the remainder of the four digits.
(2) Input the password again. An "
matches. If there is a mistake, the asterisks turn off. Start over from step
(1) above.
If the password matches, the password registration display closes.
Note:
To cancel the number you have input, press the CANCEL button.
The asterisks disappear and the display returns to the input standby mode at the first
place.
To cancel the password registration mode, press the CANCEL button again. The "Pass-
word" display turns off.
This completes password registration.
The "Password" input display appears the next time the power is turned
on.
Note:
The numbers you have input are not displayed. Be sure to write down the password
and store it in a safe place.
" (asterisk) is entered for the
*
" appears when the input number
*
E-31
POWER/
STANDBY
COMPUTER
VIDEO CANCEL
FREEZE
Input buttons
VOL
MENU
ENTER
QUICK
QUICK
ECO COLOR ADJ
MUTE
ASPECT
KSTN ZOOM
AUTO