Power Cable Connections And Switching The Power On/Off; Operating - Taxan KG-PS100S User Manual

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in green, and the unit will enter the standby mode.
Attaching the Ferrite Core
Ferrite core
Cable
Note:
• When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
• The included power cable is exclusively for use with this product. Never use it with other products.
• Press the POWER/STANDBY button after the STANDBY indicator is lit in green.
2
Turn the lens cover clockwise.
1
3
Switch on the projector power
Press the POWER/STANDBY button.
POWER
The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page E-22 for informa-
tion about language selection.
• When the power is turned on, the POWER indicator starts flashing
green, then stops flashing after about 60 seconds. If the STATUS
indicator lights green at this time, the lamp mode is set to "Eco".
See E-28 and 49 for instructions on selecting.
Note:
While the POWER indicator is blinking, the power cannot be switched off.
Check that the POWER indicator is lit steadily, then switch off the power.
• If the power does not come on, see "When the STATUS Indicator is
Lit or Flashing" on Page E-55.
If the "Password" input window is displayed: See E-32.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See E-23.
The projector is now capable of regular projection.
Note:
The image can be muted quickly by closing the lens cover while the image is being projected.
4
Switch on the power of the connected equipment
To wall outlet
(button on main unit)
Firmly plug in
all the way.
When the lens cover stops with a click, the
projector is ready for projection.
2
POWER
Blinking
green
(Approxi-
mately 60
seconds)
E-21
POWER
STANDBY STATUS
Lit green
POWER/
STANDBY
MENU
COMPUTER ENTER
VIDEO CANCEL QUICK
POWER
STANDBY STATUS
Goes off
This Lit green
indicator is Power is
also lit on
green in
Eco-mode.
STANDBY STATUS
This
indicator is
also lit
green in
Eco-mode.