Data Processor Unit - JRC JCY-1850 Instruction Manual

1.5.3 Data Processor Unit

1.5.3.1 Names of each part of the Data processor Unit
9) AUDIO IN CONNECTOR
7) CF CARD
2) REC START SWITCH
8) CF CARD EJECT BUTTON
1) REC LED
4) CARD LED
5) MEDIA LED
3) REC STOP SWITCH
6) CARD STOP SWITCH
10) HUB (VDR-LAN)
11) LAN CONNECTOR (JRC-LAN)
MAIN CONTROL BOARD
（AUDIO RECORDING BOARD on MCB）
Table 5: Names and Functions of each BOARD in the Data Processor Unit
Board name
MAIN CONTROL BOARD
(MCB)
FRAME GRABBER BOARD
(FGB) -Option-
Figure 5: The Data Processor Unit
Function
The main processing module of the Recording Control Unit.
Records all the data to the Protective Capsule Unit and the CF
CARD.
Used to receive the IEC61162-1/2 signals (CH01-CH16) and
AUDIO signals.
Used to capture the image signals from the RADAR, compress
them, and send them to the Main Control Board via HUB.
15
1. Operation
12) RGB1 IN CONNECTOR
13) RGB2 IN CONNECTOR
14) LAN CONNECTOR
(VDR-LAN)
(Option)
FRAME GRABBER BOARD