3.1.9 Removing the front board
(See Figs.14 to 16)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) From the rear side of the front panel assembly, remove the
four screws Q attaching the rear cover to the front panel as-
sembly. (See Fig.14.)
(2) Release the twelve joints b of the front panel assembly and
remove the rear cover. (See Fig.15.)
(3) Take out the front board from the front panel assembly.
(See Fig.16.)
Rear cover
Q
Fig.14
b
Rear cover
b
Fig.15
Front panel assembly
Fig.16
Q
Q
b
b
Front board
(No.MA140)1-11