Planning A Route In Advance - TomTom GO User Manual

2. Select Drive to.
The search screen opens with the keyboard showing.
3. Type in your mapcode. You can enter any of these mapcode types:

International, for example, S8VXZ.PJZ2.

Country-specific, for example, USA WW6G.S9GT.

Alternative country-specific, for example, DC LQ.FR or DC JJ.1B2.
Tip: All the mapcodes in this example are for the same location - the US Capitol building in
Washington DC, USA. See
location.
4. When the full map code has been entered, the location is shown in the Addresses column.
Towns and roads are shown on the left, POIs are shown on the right.
Tip: To see more results, hide the keyboard or scroll down the results list.
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map
button:
5. Select a suggestion for your destination.
6. To plan a route to this destination, select Drive/Ride, depending on which device you are using.
A route is planned and then guidance to your destination begins. As soon as you start driving, the
guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the
time difference in hours and half hours in the
arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route in advance

You can plan a route in advance before you drive it. You can save the route as part of your
list.
To plan a route in advance, do the following:
1. Search for the location you want to use as a starting point.
2. Select Show on Map.
3. Select the pop-up menu button.
About mapcodes for information on how to get a mapcode for a
arrival information
that you have already planned.
My Routes.
63
panel. The estimated time of
My Routes