Table of Contents
Advertisement
Debugging
USB debugging
When enabled, allows debugging when the device is
attached to a PC by a USB cable.
From the Developer options screen, touch USB
debugging to enable or disable the setting. When
enabled, a check mark appears in the check box.
Allow mock locations
This setting is used by developers when developing location-
based applications.
From the Developer options screen, touch Allow mock
locations to enable or disable the setting.
When enabled, a check mark appears in the check box.
Select app to be debugged
From the Developer options screen, touch Select app to
be debugged to select one of the apps you are
developing for debugging.
Wait for debugger
From the Developer options screen, touch Wait for
debugger to delay launcing of the Select app to be
debugged until the debugger has attached.
192
Input
From the Developer options screen, under Input, touch
the check box next to each of the following options to
enable it: (When enabled, a check mark appears in the
check box.)
• Show touches: Displays touch interactions on the screen.
• Show pointer location: Highlights the data that was touched
on the screen.
Advertisement
Table of Contents
