Electrical Connection - Electrolux EBCGL70CN User Manual

Table of Contents

Advertisement

20
www.electrolux.com
A
1. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
2. Push the appliance into the recess.
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).

13.3 Electrical connection

WARNING!
If service is required always
disconnect the appliance
from the power supply.
A
A
B
13 mm
N
A
20 mm
B
~50 mm
A 388
A
mm
N 380-388
mm
252 mm
Use a power cable of H05VV-F or higher.
Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mm-
contact separation to enable a
simultaneous and all-pole cut off from the
mains (according to NIN SEV 1000). The
customer must have a socket for the
electrical connection that is accessible
and outside the coordination room. The
length of the connection cable must be
approximately 120 cm with lines
connected directly to the mains.
Only a qualified person can
connect the appliance to the
electricity supply.
1. Do the electrical connections as in the
connection illustration.
2. Secure the cable grip.
N min.
550 mm
A 567
20
mm
mm
N 560 mm
A 592 mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ebcgl70sp

Table of Contents