Wi-Fi Direct; Soft Ap (Wi-Fi Hotspot) - Samsung RM49H User Manual

Wi-Fi Direct

MENU m → Network → Wi-Fi Direct → ENTER E
― To use this function, your mobile device should be supported by the
Set to connect the product to wireless mobile devices. Using this function, you can connect
wireless mobile devices with your product directly without a router.
To connect your mobile device with your product using Wi-Fi
Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
• PBC (Push Button Configuration): Press the
2 minutes. Your product automatically acquires all the network setting values it needs and
connects to your network.
• PIN: Input the displayed PIN on your device.
Wi-Fi Direct.
WPS(PBC) button on your Wi-Fi device within

Soft AP (Wi-Fi Hotspot)

MENU m → Network → Soft AP (Wi-Fi Hotspot)
Using this function, you can connect the product on your mobile devices if your mobile devices
do not support Wi-Fi Direct.
Set the options for connection of Wi-Fi device.
• Soft AP (Wi-Fi Hotspot)
Turns on or off the Soft AP (Wi-Fi
mobile devices can find the product name in Wi-Fi connection list.
• Connection Information
Shows the security key.
• Reset password
Powering on the display creates a new security key and disconnect any existing
(Wi-Fi Hotspot) connection.
– Off / On
• Advanced Settings
Change detailed Wi-Fi settings.
– Channel (Auto / CH.1 ~ CH.11)
Change Wi-Fi channel settings.
– Signal Level (Level 1 ~ Level 5)
Change Wi-Fi signal level settings.
→ ENTER E
Hotspot). When Soft AP (Wi-Fi Hotspot) is set to On, your
Soft AP
81