Wall-Mount Plate Mounting - Planet ISW-500T User Manual

Step 5: Lightly pull out the bottom of the switch for removing
it from the track.

5.2 Wall-mount Plate Mounting

To install the Industrial Ethernet Switch on the wall, please
follow the instructions described below.
Step 1: To remove the DIN rail from the Industrial Ethernet
Switch, loosen the screws.
Step 2: Place the wall-mount plate on the rear panel of the
Industrial Ethernet Switch.
Step 3: Use the screws to screw the wall-mount plate on the
Industrial Ethernet Switch.
Step 4: Use the hook holes at the corners of the wall-mount
plate to hang the Industrial Ethernet Switch on the
wall.
Step 5: To remove the wall-mount plate, reverse the steps
above.
15