Osx Change System State Dialog Box - Siemens SIMATIC PCS 7 OSx Operator's Manual

Basic System Functions (continued)
1-28
OSx Station Basics
To change the system state, select
menu bar (Figure 1-6). Then select the new state from the dialog box.
Controls Startup
Change System State
Logoff
Logon
OSx Terminal
Figure 1-6 OSx Change System State Dialog Box
State changes in a multiple-station system are global — that is, a state
change in one OSx station changes the state for all stations — except under
the following circumstances:
• State changes on a station with the sysadmin role do not affect other
stations, and vice versa.
State changes on a station set to out_of_service do not affect other
•
stations, and vice versa.
• When an OSx station transitions to Failed state, typically because an
important process has failed, its state change does not affect other
stations, and vice versa.
Controls- ->Change System State
Change System State
Operate
Offline
Shutdown OSx
Shutdown OSx and Linux
OK Cancel
SIMATIC PCS 7 OSx 4.1.2 Operator
on the