Yamaha Portatone PSR-S700 Service Manual page 68

PSR-S700/PSR-S900
Test No. LCD display
34 034 : Modulation Wheel Check
OK:
034 : Modulation Wheel Check
OK
NG:
034 : Modulation Wheel Check
NG
39 039 : Pedal 1 Check
OK:
039 : Pedal 1 Check
OK
NG:
039 : Pedal 1 Check
NG
40 040 : Pedal 2 Check
OK:
039 : Pedal 2 Check
OK
NG:
039 : Pedal 2 Check
NG
42 042 : MIDI Check
OK:
042 : MIDI Check
OK
NG:
042 : MIDI Check
NG
43 043 : VIDEO OUT NTSC RGB
(PSR-S900 on y)
44 044 : VIDEO OUT PAL RGB
(PSR-S900 on y)
46 046 : USB to Device/Host Check
1:
046 : USB to Device/Host Check
Connect Device – Host
2:
046 : USB to Device/Host Check
Device – Host OK
3:
046 : USB to Device/Host Check
Connect USB Storage
OK:
046 : USB to Device/Host Check
OK
NG:
046 : USB to Device/Host Check
NG
68
Test descriptions, judging conditions, etc.
Check ng MODULATION.
Turn the [MODULATION] whee away from you to the end and then toward you to the end. When
the whee s at max mum, C3 s p ayed. When turned to m n mum, C4 s p ayed. Check that
"Modulation Wheel Check OK" s d sp ayed on the LCD when the test s comp eted.
Check ng the Peda 1.
Connect the foot contro er (FC7) to the [FOOT PEDAL 1] jack.
When the peda s set to the m n mum and C3 s p ayed. When the peda s set to the max mum
and G3 s p ayed.
D sconnect the foot contro er from the [FOOT PEDAL 1] jack and C4 s p ayed.
Check that "Pedal 1 Check OK" s d sp ayed on the LCD when the test s comp eted.
Check ng the Peda 2.
Connect the foot contro er (FC7) to the [FOOT PEDAL 2] jack.
When the peda s set to the m n mum and C3 s p ayed. When the peda s set to the max mum
and G3 s p ayed.
D sconnect the foot contro er from the [FOOT PEDAL 2] jack and C4 s p ayed.
Check that "Pedal 2 Check OK" s d sp ayed on the LCD when the test s comp eted.
Check ng MIDI.
Connect the [MIDI IN] connector and [MIDI OUT] connector w th a MIDI cab e and then execute
the test.
Check that C4 s p ayed and "MIDI Check OK" s d sp ayed on the LCD.
Check ng V deo OUT.
Connect an appropr ate d sp ay mon tor to the [VIDEO OUT] jack.
Check that RGB co or code s shown on the d sp ay mon tor when the test s executed.
Check ng V deo OUT.
Connect an appropr ate d sp ay mon tor to the [VIDEO OUT] jack.
Check that RGB co or code s shown on the d sp ay mon tor when the test s executed.
Check ng USB Dev ce/Host.
Enter the test w th the [START/STOP] button and "Connect Device – Host" w be shown on
the LCD.
When a USB cab e s connected to the [USB TO DEVICE] and [USB TO HOST] connectors,
"Device – Host OK" s shown on the LCD and qu ck y fo owed by "Connect USB Storage".
D sconnect the USB cab e from the [USB TO DEVICE] and [USB TO HOST] connectors and then
connect a USB storage dev ce to [USB TO DEVICE] connector. Check that C4 w be p ayed and
"USB to Device/Host Check OK" w be shown on the LCD.