Drill Points; Manipulate Graphic Display - Siemens SINUMERIK 840Di Operator's Manual

2
03.02
2.4

Drill points

Any Position
Row of Holes
Hole Circle
Hole Matrix
2.5

Manipulate graphic display

 Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
Set drill points
1. Full circle as drill hole
You can select a full circle with the Drill Points function. The G
code generated is output in the cycle format.
Drill points start
2. You can select the drill pattern to parameterize drill points as
• any drill positions
• according to cycle
• according to cycle
• according to cycle.
For further information about drill cycles and drill patterns, please see:
/PGZ/, Programming Guide Cycles, Chapter 2
Drill points end
3. This button accepts drill points selected from the drill pattern.
Select the processing area:
If the file contains a large number of supplementary drawings such as
cuts, hatching, labeling, detail views, borders, etc., you can reduce the
number of elements by using a "lasso" to select a processing area.
Deselect the processing area:
You can click this button to deselect the processing area again.
How to Use the CAD Reader

2.4 Drill points

2
2-23