Menu functions
Use this menu to customise the SMS settings.
The setting options available in this menu may vary
depending on your service provider.
•
Setting x (where x is the setting group number):
each group has its own submenu.
Service center: store or changes the number of
your message centre.
Default destination: store a default destination
number.
Default type: set the default message type.
32
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: change the name of the setting
group.
•
Common setting: the following options are
available:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery reports: set the network to inform you
when your messages have been delivered.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to uni-
code if you enter a uni-code character. Use of uni-
code encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the automatic
character encoding by default.