Specific Service Instructions; Disassembly - JVC KW-AVX900EU Service Manual

This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1 Main body
3.1.1 Removing the FRONT PANEL assembly (See Fig.1 to
4)
(1) From the bottom side of main body, insert the screwdriver
to hole of the third gear from hole a of the bottom chassis,
and then turn the gear to clockwise until FRONT PANEL
assembly comes up. (See Fig.1)
(2) Remove the two screws A attaching the both side of the
FRONT PANEL assembly. (See Fig.2)
(3) Remove the four screws B attaching the both side of the
FRONT PANEL assembly. (See Fig.2)
(4) Remove the one screw C attaching the FPC GUIDE. (See
Fig.3)
(5) Remove the one screw D attaching the FRONT CHASSIS.
(See Fig.3)
(6) Disconnect the card wire from MONITOR assembly con-
nected to connector CN401
bly. (See Fig.4)
(7) Disengage two hooks a engaged FRONT CHASSIS. (See
Fig.2)
1-10 (No.MA341)
SECTION 2

SPECIFIC SERVICE INSTRUCTIONS

SECTION 3

DISASSEMBLY

of the PANEL BOARD assem-
Fig.1
hook
A B
a
hook
Fig.2
a
hole
a
B A