Searching for Bluetooth Devices and Connecting
Go to
WIRELESS
audio devices and then connect any detected devices to the projector. (If the
device name is longer than 20 characters, only the first 20 will be displayed.)
1
Set the Bluetooth device to pairing mode and then select
•
Select
Stop searching
•
If the device has not been detected, check that the device is powered on and in
pairing mode.
•
The time it takes to search for devices may vary according to the signal strength
and the number of devices.
2
When the search is complete, you can select a Bluetooth device and connect
to it.
•
You can stop the connection process immediately by selecting
•
The time it takes to connect to a device may vary according to the signal
strength and the number of devices.
Search Device
List
Please wait.
Stop searching
Search Device
to view the devices detected so far.
WIRELESS
• SCREEN SHARE
• Group
• Channel
• Bluetooth
• Search Device
• List of registered devices
• AV Sync. Adjust
Searching...
Close
to search for nearby Bluetooth
Search
ꔂ Move ꔉ OK
: [PJTR][LG]PH30JG[0000]
: On
Search Device
List
Search complete
HBS-700
Press OK(ꔉ) to connect the device.
Re-search
11
Device.
Stop
searching.
Close