TrekStor i.Beat soundboxx BT Operating Instructions Manual page 35

Switching to Bluetooth® mode
Switch on the MP3-Player. If no memory card
with audio files is inserted into the device, the
MP3-Player automatically goes into Bluetooth®
mode and searches for devices to connect to.
In this mode, the status LED flashes blue.
If there is a memory card in the MP3-Player,
briefly press the
Bluetooth® mode.
Connection setup and playback
After switching to Bluetooth® mode, turn on the
Bluetooth® function on the device you wish to
connect. Then connect to the MP3-Player.
A signal tone will sound to confirm
that the two devices have successfully
connected to each other.
Now select an audio file on the connected
device to begin playback.
To exit Bluetooth® mode, briefly press the
button on the MP3-Player or turn off the
!
Bluetooth® function on the connected device.
Either way, when the connection is
terminated, you will hear the message
"Disconnection".
button to switch to
!
35 EN